Shaft Clamp

All EPT shaft collars, including quick-clamping collars, are sole point faced to ensure perpendicularity and proper alignment. This critical manufacturing step assures specific shaft collar facial area to bore relationship leading to correct element positioning on the shaft and actually pressure on interfaced parts.
Quick-clamping shaft collars from EPT are manufactured from high quality aluminium with type-II sulfuric anodized finishes, with a black finish on the collar and a gold finish about the clamping lever for added visibility. Aluminum collars are corrosion resistant, lighter than additional metals, have low inertia and have non-magnetic properties. All EPT items are RoHS and REACH compliant. Available normal sizes for the quick-clamping shaft collars happen to be 0.375” to 1 1.5” in the inch series and 8 mm to 38 mm in the metric series.
Shaft Collar, Program of Measurement In ., Shaft Shaft Clamp Locking Type – Couplings 1 Piece Quick Clamp, Bore Type – Collars Simple Bore, Bore Dia. 3/8 In., Materials – Collars Black Anodized 6061 Aluminum, Exterior Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series Stainless Steel, Operating Temp. Range -40 Degrees to 200 Degrees F, Standards RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made from lightweight Aluminum, both piece design allows you to install these collars anywhere on a shaft without removing components. Furthermore to reducing the entire weight, the flats permit you to rotate a shaft without marring or gouging the shaft. Simply place the collar on the shaft and tighten the two socket-mind cap screws to protected the collar and a wrench and be positioned on the collar’s flats to rotate the whole shaft/collar assembly.
Made of lightweight Aluminum
Permits you to install these collars anywhere on a shaft without removing components
Merely place the collar in the shaft and tighten both socket-head cap screws to secure the collar
Flats let you rotate a shaft without marring
Climax Part C-056-S Set Screw Collar is made with T303 Stainless Steel, which works well in corrosive environments. Measurements are 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It really is effective on hard and very soft shafts. It is a Affordable collar design, and Conveniently installed where major disassembly would or else be required.
EPT quick clamping shaft collars collar clamp hinge acquire manufacturing 2 1 8 in metal,shaft collar clamp power manufacturing metal vex clamping style,vex clamping shaft collar collars a single piece with lever clamp hinge,vex clamping shaft collar clamp 3d model production quick 1 3 8 in alum,EPT speedy clamping shaft collars collar clamp 2pc 1 in steel stainless split with lever,climax metal s shaft collar two part clamp style EPT speedy clamping collars 2computer 1 in steel push,clamp in shaft collars couplings universal clamping collar style with mounting holes 2pc 1 in steel,shaft collar clamp drive clamping calculation quick hook up collars at best value in,clamp shaft collar clamping collars induce calculation speedy connect,stainless steel dual split shaft collar with speedy clamping clamp hinge force calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head has an outside surface free of major projections for safety.
Design totally engages the shaft without marring.
Greater axial holding power than established screw collars.
Effective on hard & very soft shafts.
Indefinitely adjustable and easy to remove, one-piece clamping collars are usually used on hard or gentle standard round shafts, above a split hub or about thin wall tube. Through the use of friction to supply superior grip on pubs and shafts, solo split collars provide sturdier, more trustworthy results when compared to the set screw design of solid collars. They also offer tremendous axial electric power, while minimizing shaft distortion for top-quality performance and decreased wear and tear.

The collar clamping mechanism works fast and proficiently with simple side opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer area of the collar. The design of the cam on the lever and the mating machined surface on the collar assure a tight fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N according to the collar bore size. In conditions where higher holding electrical power is usually or clamp axial load is required, the quick-clamping collar isn’t the recommended decision. EPT offers a complete line of industry-leading one-piece and two-piece shaft collars made for these applications.

Tags: