This gearbox utilizes a 30:1 ratio worm-drive reduction for applications that require extremely slow and smooth rotational motion. The worm-drive design not only minimizes backlash but also eliminates back-driving the gearmotor so a posture can be held even when power isn’t applied. The precision ground 3/8” stainless steel output shaft is supported by dual 3/8” ABEC 5 ball bearings to support a load from any orientation. The ¼” ABS plastic and aluminum structure offers a rigid framework without adding unnecessary weight and is definitely easily mounted to any flat surface by utilizing the bottom mounting tabs. Our Regular Spur Gear motors will work with this gearbox (engine marketed separately). The Vertical Shaft Worm-Drive Gearbox is perfect for turn-tables, time-lapse systems and low-quickness applications that require high precision and torque.
Motor RPM required = 1 / (moments per rotation desired / 30)
Example: 1 / (ten minutes per rotation / 30) = 3 RPM motor had a need to achieve ten minutes per rotation (at max speed)
Dimensions 3.43″ x 1.93″
Product Weight 5.9oz (0.375 lbs)
Output Shaft Diameter 3/8″ (0.375″)
Motor Size Compatibility Standard Spur Gear Motors
Ever-Power gives you the widest range of standard, non standard and customised worm gearbox and worm equipment motor.
Ever-Power maintains the highest level of standard in production of worm gears in gearboxes. From the look of gearbox, materials selection to production practice of worm equipment box and gear engine.
Models: 30, 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
Small Worm Gearbox Versions like C.D. 50, 60, 75, 85, 100 mm and Ratio 30/1 or 40/1 are usually available in stock or can be made on brief notice by customer.
Worm gearboxes are experiencing cast iron equipment case, worm shaft is of Alloy Metal, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Ever-Power worm gear boxes have liberal ribbing for increasing high temperature dissipation region, streamlined sump to carry more oil and fan of ample size which works well in both part of rotation.
Wherever applicable, British in addition to Indian Design standards are used. Worm Shafts conform to case- hardening Alloy Steels, Worm Wheels comply with phosphorous-bronze according to BS 1400, While Equipment case conforms to C.I. Grade 20, IS210.
High reduction gear
Worm and wheel equipment pairings provide large velocity reduction ratios with only 1 gear pairing in a far more compact space when compared with other styles of gears. We offer up to maximum ratio of 100:1 with this products. Another benefit of the Worm and Wheel equipment pairings may be the low level noise they produce. Some drawbacks are the general low efficiency and the fact that they generate warmth.
Benefit of EP’s Worm Gears – “Frosty rolled Worm Gears”
1) The hardness of the helicoid surface has been achieved by work hardening when the cool rolling was performed, providing Worm gears with better mechanical properties than machined worms because of fact that the metallic fibrous structure is not cut.
2) The surface hardness after chilly rolling is increased by 1.2 to 1 1.3 times when compared with the hardness of the initial material, and the hardness of the helicoid surface increases to around HB240 to 260.
3) Cold rolled worms are suitable for miniature equipment applications since this could be rotated smoothly without damaging the worm wheels crafted from POM or additional soft materials.
4) Because of the implementation of the cold rolling technique, the helicoid surface of EP-Worm (M0.5 to 2.0) comes out with a mirror like complete. Thus, EP-Precision Chilly Rolled Worms give a smooth procedure and long term durability.
Worm gears are made of a worm and a equipment (sometimes referred to as a worm wheel), with nonparallel, nonintersecting shafts oriented 90 degrees to each other. The worm is analogous to a screw with a V-type thread, and the apparatus is analogous to a spur equipment. The worm is normally the driving component, with the worm’s thread advancing the teeth of the gear.
Just like a ball screw, the worm in a worm gear may have a single start or multiple starts – meaning that there are multiple threads, or helicies, on the worm. For a single-start worm, each complete convert (360 degrees) of the worm advances the equipment by one tooth. So a gear with 24 teeth provides a gear reduction of 24:1. For a multi-begin worm, the gear reduction equals the number of teeth on the gear, divided by the number of starts on the worm. (That is different from almost every other types of gears, where the gear reduction is usually a function of the diameters of the two components.)
The meshing of the worm and the apparatus is an assortment of sliding and rolling actions, but sliding contact dominates at high reduction ratios. This sliding worm wheel gearbox actions causes friction and warmth, which limits the effectiveness of worm gears to 30 to 50 percent. In order to minimize friction (and therefore, temperature), the worm and equipment are made from dissimilar metals – for example, the worm may be made of hardened steel and the gear made of bronze or aluminum.
Although the sliding contact reduces efficiency, it provides extremely quiet operation. (The use of dissimilar metals for the worm and gear also contributes to quiet procedure.) This makes worm gears ideal for use where noise should be minimized, such as in elevators. In addition, the use of a softer material for the gear means that it could absorb shock loads, like those skilled in heavy equipment or crushing devices.
The primary benefit of worm gears is their ability to provide high reduction ratios and correspondingly high torque multiplication. They can also be used as rate reducers in low- to medium-speed applications. And, because their reduction ratio is founded on the amount of gear teeth only, they are smaller sized than other styles of gears. Like fine-pitch lead screws, worm gears are usually self-locking, which makes them well suited for hoisting and lifting applications.
Worms & Worm Gears
EP Gear’s worms and worm gears provide an effective answer for power tranny applications requiring high-ratio velocity reduction in a limited space using right angle (90°), non-intersecting shafts. When properly applied, worms and worm gears supply the smoothest, quietest type of gearing.
Because the effectiveness of a worm equipment drive depends upon the business lead angle and number of starts on the worm – and because increased effectiveness is always an objective, the ratio ought to be kept as low as possible. To run correctly, worms and worm gears utilized together will need to have the same diametral pitch and threads.
Our complete line of worms and worm gears could be ordered through the EP Equipment Guaranteed Same Day Shipment Plan for the fastest delivery possible.
90°, non-intersecting shaft applications answer highly specialized power tranny needs.
Our worm gears offer the smoothest, quietest form of gearing.
They provide high-ratio speed reduction in minimal spaces.
Their efficiency is easily increased by reducing ratios.
With some ratios, there is resistance to back driving.
Available from 48 DP to 3 DP
Stocked as single, double and quad start configurations
How to Select High Efficient Worm Gearbox?
The worm gear manufacturing process is also relatively simple. Nevertheless, there is a low transmission performance problem if you don’t understand the how to select the worm gearbox. 3 basic indicate choose high worm equipment efficiency that you need to know:
1) Helix position. The worm equipment drive efficiency mostly depend on the helix angle of the worm. Usually, multiple thread worms and gears is certainly more efficient than solitary thread worms. Proper thread worms can increase performance.
2) Lubrication. To choose a brand lubricating oil is an essential factor to improve worm gearbox efficiency. As the proper lubrication can decrease worm gear action friction and warmth.
3) Material selection and Gear Production Technology. For worm shaft, the material ought to be hardened steel. The worm gear material ought to be aluminium bronze. By reducing the worm gear hardness, the friction on the worm the teeth is reduced. In worm manufacturing, to use the specific machine for gear reducing and tooth grinding of worms can also increase worm gearbox efficiency.
From a big transmission gearbox power to a straight small worm gearbox load, you can choose one from an array of worm reducer that precisely suits your application requirements.
Worm Gear Container Assembly：
1) You can complete the installation in six various ways.
2) The installation should be solid and reliable.
3) Ensure that you verify the connection between your electric motor and the worm equipment reducer.
4) You must use flexible cables and wiring for a manual set up.
With the help of the most advanced science and drive technology, we have developed several unique “square package” designed from high-quality aluminium die casting with a lovely appearance. The modular worm gearbox style series: worm drive gearbox, parallel shaft gearbox, bevel helical gearbox, spiral bevel gearbox, coaxial gearbox, correct angle gearbox. An NMRV series gearbox is a standard worm gearbox with a bronze worm gear and a worm. Our Helical gearbox products consists of four universal series (R/S/K/F) and a step-less acceleration variation UDL series. Their structure and function act like an NMRV worm gearbox.
In the EP worm gears, the output shaft is offset by 90° from the drive shaft. A dual shaft for double-sided result or a cover for the short shaft end are elective as components. EP gearboxes have a high-quality, long-term synthetic lubricant on the basis of polyethylene glycol, and so are therefore maintenancefree. They are characterized by high performance and self-locking.
Due to their relatively high backlash (~1-2°), worm gears aren’t suitable for positioning applications.
Worm Gear applications
Program of worm gears, which is similar to a typical spur and the worm, which really is a cylindrical equipment that resembles a screw, permits smaller gearboxes or planetary drives, whilst retaining torque or power. It is common for worm gears to have got reductions of 20:1, and even up to 300:1 or greater.
Typical gearing includes the unique capability which other gearing components don’t have – the “worm” can effortlessly spin the part, however the “gears” are not able to maneuver and fully rotate the worm-zone.
What’s the reason behind this inability to rotate the gear-worm?
The angle is not deep enough on the worm, so when the apparatus attempts to rotate the worm, high frictional pressure between worm shaft and gear parts keep carefully the zone stuck in position.
Committed to excellence, our employees possess the most important priority satisfying your gear building needs and product improvement.
Also, we take pride inside our equipment; few manufacturers have the equipment to engineer metal parts as precise as we do. Actually fewer manufacturing businesses have the machining devices to check the tolerances we are able to hold.
Being a gearing producer to Automotive level businesses, with a diverse supply of material types, allow us to attain the most challenging project requirements. The mixture of robust components, advanced manufacturer technologies, reliability and our commitment to client satisfaction makes us a top provider in advanced gearing and shafting items.
Our gear manufacturing locations have over twenty years of worm gear style expertise, gained through many tasks that included varied sizes of customized worm gears to print requirements.