small worm gearbox

Small Precison Worm Reduction Gearboxes
There are a number of specifications you will need to consider when making a worm gearbox selection.
First, what’s the input and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm gear reducer.
If how big is the gearbox is going to be an important consideration then check the reducer dimension specs, not all manufacturers make compact units. Actually, working with the right supplier can help you not merely find the right equipment reducer but also avoid some of the most typical errors in reducer selection. We provide a free guide to assist you find the right supplier to work with.
For low and fractional horsepower software we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output are the major differences between these two models. Both feature the hollow or solid output shaft. Both models are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your particular application or task is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps simple to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is so versatile it can work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using small worm gearbox miniature gears, Ever-Power offers designed and built exclusive, high precision mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and created to meet your specific specifications.
E mail us for the mini gearbox the application requires, or demand a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, swiftness reducers, equipment drives, and gearmotors. All conditions can be used more or less interchangeably. Please note that the links for our little gear drives include details on the full selection of body sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel box miniature equipment drives are program rated for the the best balance of efficiency and cost. Torque could be balanced to meet your RPM and operating life requirements. Light-weight with low backlash functionality (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They offer an output shaft at 90° from the input, and are available in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from reverse sides of the housing; output is certainly a keyed bore. Standard single- and double-end shafts are available and given keys and retainer rings. An array of equipment ratios and input sizes can be found to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long lasting lubrication. They offer two input shafts on opposing sides of the frame, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high performance efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes create an output at 90° from the insight. They deliver superior overall performance in an amazing array applications and are built with small footprints, making them perfect for procedures where space is bound. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for boosts to 3,000 RPM. Aluminium housings and stainless steel gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your the majority of demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver excellent performance with high efficiency, and feature rugged construction for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a customized miniature gearbox to meet your unique specs. We can produce custom micro gearboxes in virtually any configuration the application requires, with result torque amounts as high as 900Nm. We are able to work from your own gearbox designs, reverse engineer a preexisting unit, or assist you to develop an all-new style that delivers the performance you need. Ask for a quote on a custom made miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive important and retainer rings could be supplied to your specs for just about any of our hollow bore miniature gearboxes. We offer a basic selection of solitary ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We offer a broad collection of misalignment shaft couplings in ” and metric bore sizes. ” and metric precision floor shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox experts. All of our micro gear drive models deliver superior efficiency in a little footprint, and are tough enough for challenging work environments. Contact us to learn more about our mini gearboxes, or ask for a quote on a custom model that is tailored to your needs.
Additional advantages of worm drive gearboxes include: