We are committed to research and production of goods that meet the increasingly advanced electronics industry and are trusted in computers, kitchen appliances, consumer electronics, communications, data, industry, medical and various other fields.
We also offers patent for 360 level AC PIN interchangeable type adaptor 
and it is leading the world’s special design.
Ever-Power provides goods which are smaller sized, lighter, more electric power efficient, and much easier to use.
We selling products around the globe and acquire the certifications for each of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet the latest regulations.
Gear adapters attach between the vehicle tranny and power take-off, and will serve several purposes. Most commonly, adapters are used to change the direction of rotation of the PTO productivity shaft. They can be employed to space the PTO out and away from the transmission circumstance. On some imported or non-SAE normal transmissions they enable the mounting of standard 6-bolt power take-offs. Gear Adapters can be found to fit most popular transmissions.
Different body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Adjustments PTO shaft rotation: Suits PTO rotation compared to that of the driven equipment
Standard and non-standard bolt patterns: Suits SAE standard PTOs to non-standard transmissions
• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ metal tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; optimum of 22 GPM (creates 20 to 40 HP off of the power take off)
• No need to modify electric power take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with electric motor, hydraulic hoses and flat faced couplers
• Perfect for three point electricity take off gear – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches give a safe methods to protect operators and costly machinery from circumstances when the inertia of PTO powered put into action exceeds and over-runs the tractor PTO rate. When this happens, the over-jogging Pto Adapter china coupler will free-wheel
smoothly and securely. Over-operating clutches will normally stand up to applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Severe shock loads or drive line angularity will certainly reduce this capability
If the space of your PTO will not fit correctly within a tractor, a PTO adapter can extend the size without needing to replace it for a new one. This adapter comes with an overall amount of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional duration on the finish of your PTO. This tractor PTO shaft adapter features both a female 6 spline end and a male 6 spline end, each end includes a diameter of 1-3/8 in. This enables more connection options and is well suited for anyone that owns an older tractor because the older parts may not be produced any longer and so are less common.
The over-running coupler can be an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit may be required to over-run generating source. The coupler drives solidly from tractor to put into action and free wheels smoothly when put into practice exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Required with 1000 RPM gearcase upgrade or Three Point Hitch kit for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect meet for your Shop Dog. It can be conveniently carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter reduces the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall length of 6-3/8″ and is ranked for tractors up to 70 HP.