hydraulic planetary drive

Single and dual reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high acceleration, low torque sources to deliver reduced speeds at increased torques. The input side has standard SAE pads for motor mounting. Obtainable in the three output configurations shown below. Many units can be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input quickness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Units provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is definitely standard on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side choices include: Keyed round, hexed, hollow, hydraulic planetary drive tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth caused by wear. The exterior bearing nut supplies the supreme in shaft retention and shaft strength. Output could be a spindle shaft or various sizes of integral pinion gears.