The EP Greenhouse gear driver is a compact and lightweight reduction reducer with an integrated limit switch system that’s ideal for assembly of a locally available electric electric motor. The geared motor can be used in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor is rainproof and windproof. The gearbox includes a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is certainly locked when the reduction gearbox isn’t running. The fully sealed reduction geared motor comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all situations, even at high temperature ranges. Thanks to the use of an growth chamber, the reducer can be installed in any placement. There are no limitations, since there is no need for a bleed connect. The sealed reduction gearbox keeps the gear oil of the reducer in optimal condition for its entire operating life time. The geared motor is suitable for discontinuous use, working course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction reducer has an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an integrated chamber and is enclosed by an impact-resistant plastic-type material cover. The limit change system is accessible and easy to adjust. The limit change system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The geared motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).