electric fan motor

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control switch is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Application Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw even. There are (4) electric fan motor china threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). In the event that you order several electric motor at the same time, we can do our better to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan app. This is a completely enclosed fan electric electric motor and made to have continuous ventilation over the engine casing for cooling. The housing isn’t vented and the electric electric motor will overheat and get into automated thermal overload if operate in a nonfan program where there isn’t strong ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electric motor for applications apart from 18 & 24″ TPI fans may possibly also overload the motor and lead it to proceed into automatic thermal overload. (Your companion blade from another producer may possess a steeper blade position.)
Origin: This electric electric motor is produced in China.

Tags: